Prof 6 On Wheels
ABM SYSTEM
The ELIET PROF 6 has an additional option, namely an ABM system (Anti-Block Motor), also used in the ELIET Prof 5. This ingenious system fully autonomously regulates the feed speed. A sensor meticulously controls every change in the revolutions of the engine.
V-SAFE INFEED HOPPER
The specially shaped V-safe infeed hopper ensures that larger parcels of pruning waste can be fed in quickly and safely.
IMPELLER
Natural trimming chips are not discharged on the basis of the removal force of the blade system, but are carried away by the powerful airflow generated by the 325 mm blade turbine.
BLOW CHUTE
The Prof 6 blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the fl ying chips. As a result the machine
has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 1,8 m / 6 ft and a rotation span of 280°.
AGRICULTURAL TYRES
WHEEL DRIVE
The wheels of the new Prof 6 were equipped with a powerful wheel motor. The speed forward or in reverse is controlled with a simple movement from the pulse via a rotating handle on the handlebar. The more the handle is rotated forwards or backwards, the faster the machine moves in that direction. The wheel drive is so powerful that it takes only one man to load or unload the machine from a van or a trailer.
BLADES
The blades that are fitted to the Prof 6 are not ordinary steel blades. The Prof 6 is designed to operate at least 8 hours a day. The blades have been specially designed so that their blade life matches the workload and duty cycles.
MAINTENANCE-FRIENDLY
Under the “FAST PITSTOP” motto, the machine is designed to be dismantled in record time to access the critical maintenance points. This typically does not require any tools. You can perform a quick check-up or routine maintenance at the end of each working day. It also facilitates somewhat more involved maintenance. This keeps the machine in top working order so it can deliver optimal performance every day.
Prof 6 Cross Country
V-SAFE INFEED HOPPER
The specially shaped V-safe infeed hopper ensures that larger parcels of pruning waste can be fed in quickly and safely.
ABM SYSTEM
The ELIET PROF 6 has an additional option, namely an ABM system (Anti-Block Motor), also used in the ELIET Prof 5. This ingenious system fully autonomously regulates the feed speed. A sensor meticulously controls every change in the revolutions of the engine.
TRACKS
Caterpillar tracks prove highly effective on hilly countryside with plenty of slopes. Despite the impressive set of tracks, the weight of the Cross Country is still quite limited. As a result the ground pressure is very low, which means that the caterpillar tracked shredder can also be used on a lawn without any risk of doing damage.
TRACK DRIVE
Operating the track drive is just as simple as the wheel based Prof6. The only difference is that on the Cross Country, two handles on the handlebar allow for individual control of each track separate caterpillar. Making the track rotate in opposite directions will turn the machine around its axis. This high manoeuvrability offers the opportunity to get into hard-to-reach places and simultaneously yields enormous time savings.
MAINTENANCE-FRIENDLY
Under the “FAST PITSTOP” motto, the machine is designed to be dismantled in record time to access the critical maintenance points. This typically does not require any tools. You can perform a quick check-up or routine maintenance at the end of each working day. It also facilitates somewhat more involved maintenance. This keeps the machine in top working order so it can deliver optimal performance every day.
BLADES
The blades that are fitted to the Prof 6 are not ordinary steel blades. The Prof 6 is designed to operate at least 8 hours a day. The blades have been specially designed so that their blade life matches the workload and duty cycles.
BLOW CHUTE
The Prof 6 blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the fl ying chips. As a result the machine
has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 1,8 m / 6 ft and a rotation span of 280°.
IMPELLER
Natural trimming chips are not discharged on the basis of the removal force of the blade system, but are carried away by the powerful airflow generated by the 325 mm blade turbine.
Prof 6 On Road
MAINTENANCE-FRIENDLY
Under the “FAST PITSTOP” motto, the machine is designed to be dismantled in record time to access the critical maintenance points. This typically does not require any tools. You can perform a quick check-up or routine maintenance at the end of each working day. It also facilitates somewhat more involved maintenance. This keeps the machine in top working order so it can deliver optimal performance every day.
BLADES
The blades that are fitted to the Prof 6 are not ordinary steel blades. The Prof 6 is designed to operate at least 8 hours a day. The blades have been specially designed so that their blade life matches the workload and duty cycles.
BLOW CHUTE
The Prof 6 blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the flying chips. As a result the machine has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 1,8 m / 6 ft and a rotation span of 280°.
IMPELLER
Natural trimming chips are not discharged on the basis of the removal force of the blade system, but are carried away by the powerful airflow generated by the 325 mm blade turbine.
V-SAFE INFEED HOPPER
The specially shaped V-safe infeed hopper ensures that larger parcels of pruning waste can be fed in quickly and safely.
ABM SYSTEM
The ELIET PROF 6 has an additional option, namely an ABM system (Anti-Block Motor), also used in the ELIET Prof 5. This ingenious system fully autonomously regulates the feed speed. A sensor meticulously controls every change in the revolutions of the engine.
TRAILER
Here, the shredder is fixed onto a galvanized and spring loaded trailer. Other than that, the Prof 6 On Road has the same properties and features as the self driving model. The trailer does not add any disadvantages in terms of maintenance either. The total weight of the trailer is only 419 kg (923 lbs.) and therefore does not pose any special requirements for the towing vehicle. A nyone possessing a car driver’s licence can transport the machine. Once detached from the vehicle, the shredder’s excellent weight distribution makes it easily movable by hand also. The trailer is approved for traffic and equipped with all the required features in terms of lights, draw bar, etc.
Prof 6 PTO
ABM SYSTEM
The ELIET PROF 6 has an additional option, namely an ABM system (Anti-Block Motor), also used in the ELIET Prof 5. This ingenious system fully autonomously regulates the feed speed. A sensor meticulously controls every change in the revolutions of the engine.
V-SAFE INFEED HOPPER
The specially shaped V-safe infeed hopper ensures that larger parcels of pruning waste can be fed in quickly and safely.
IMPELLER
Natural trimming chips are not discharged on the basis of the removal force of the blade system, but are carried away by the powerful airflow generated by the 325 mm blade turbine.
BLOW CHUTE
The Prof 6 blow chute is a fine example of engineering. Its shape prevents turbulence and the design of the curve was based on the optimal trajectory of the flying chips. As a result the machine
has phenomenal propelling capacity. The choice for synthetics as the material for the blow chute was a very deliberate one: it is seamless, corrosion resistant, perfectly smooth and sound absorbing. Its low air resistance makes the chute less inclined to clog. The blow chute has a discharge height of 1,8 m / 6 ft and a rotation span of 280°.
BLADES
The blades that are fitted to the Prof 6 are not ordinary steel blades. The Prof 6 is designed to operate at least 8 hours a day. The blades have been specially designed so that their blade life matches the workload and duty cycles.
MAINTENANCE-FRIENDLY
Under the “FAST PITSTOP” motto, the machine is designed to be dismantled in record time to access the critical maintenance points. This typically does not require any tools. You can perform a quick check-up or routine maintenance at the end of each working day. It also facilitates somewhat more involved maintenance. This keeps the machine in top working order so it can deliver optimal performance every day.
